Rogue C-70 Boneyard Bars
Rogue C-70 Boneyard Bars
Product Description
All items must be shipped, pick-up not available. All sales are final. Items are in NEW condition.
Read More
ROGUE C-70 BAR
The Rogue C-70 Bar is a shorty 35LB version of the Ohio Bar. Designed for competition use in the CrossFit Games, the barbell's shorter overall length (69") allows athletes to be spaced closer together. This can also benefit anyone training in tight quarters, be it a small garage gym, tight basement or busy training facility. This bar has knurl marks for both Olympic and Powerlifting grips and the distance between collars is 43" versus the standard 52".
The C-70 Bar features the same 28.5mm diameter, American 190,000 PSI steel, bronze bushings, and dual knurl marks as the standard-length Ohio Bar. Put to the test in CrossFit Games competition, this was the short barbell that supported 400+ pound deadlifts during the Men's Finals.
Important Note: The C-70 Bar has a shorter distance between collars than a standard barbell (43" instead of 52"), meaning it cannot be racked on a standard power rack or squat stand.
All items must be shipped, pick-up not available. All sales are final. Items are in NEW condition.
1) What is a Boneyard Bar?
A Boneyard Bar is a brand new, seconds quality barbell off of Rogue’s standard production line. These bars may have minor cosmetic issues such as finish blemishes or inconsistencies with the knurl. If any flaw is found on a Rogue standard barbell, it is added to the Boneyard. These bars are guaranteed to arrive in new, ready to hit the gym condition.
2) Do all Boneyard Bars have finish blemishes?
No. A bar could have also been sent to the Boneyard for double tracked knurling (see below). Finish blemishes are more noticeable on Black Zinc or Black Oxide finishes.
Please note: Bars with a Cerakote finish may have some logo branding on the shaft due to testing our custom bar processes.
3) Do all Boneyard Bars have double tracked knurling?
No. Double tracked knurling is just one of the issues that can cause a bar to be sent to the boneyard. A small surface blemish could be the only fault. (See image below for double tracked knurl description)
4) Will my Boneyard Bar have a center knurl?
Please see the product page of the regular version.
5) Will my Boneyard Bar have dual knurl marks?
Please see the product page of the regular version.
6) Will Raw Steel rust?
A Raw Steel barbell will require some upkeep. Occasionally brushing the bar down with 3-in-1 oil or WD-40 will create a beautiful patina look. This is how bars were made for decades and it really does produce an unmatched feel.
7) Do Boneyard Bars carry a warranty
No. All Boneyard Bar sales are final.
8) Where can I find more information on each specific Bar?
All Boneyard Bars will have its standard name included in the product title. Please see that product's page for more information.
*Note: We do not specify the bushing type for Boneyard Bars
The Boneyard Bar you are purchasing can come with either composite or bronze bushings. You can check the regular page of the Boneyard Bar you are looking to purchase to determine if it normally includes composite bushings or not
Gear Specs
Specifications:
- American-Made 190,000 PSI Steel
- Weight: 35 lbs (16 kgs)
- Length: 69” (16" shorter than the Ohio Bar)
- Diameter: 28.5 mm (1.12")
- Loadable sleeve length: 12”
- Dual knurl marks for Olympic lifts and Power lifts
- No center knurl
See Also: The Rogue Barbell Cleaning Kit
Shipping
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.
Gear Specs | |
| Brand | Rogue Fitness |
| Made In USA | No |
| Loadable Sleeve Length | 12.00" |
| Diameter | 28.5MM |
| Bar Type | Men's Bars |
| Bar Use | Multipurpose |
| Bushing/Bearing | Varies |
| Bar Weight | 35LB |
| Knurl | Multi |
| Center Knurl | No |
| Knurl Mark | Varies by Barbell |
| Shaft Coating | Varies |
| Sleeve Coating | Varies |
| Tensile Strength | 190,000 PSI |
F SCALE™
The F Scale™ is a durability scale for barbells based on functional testing at stresses similar to what barbells experience when being dropped from overhead. Bars that have been treated with Rogue Work Hardening (RWH™) are designated by having an R in their F Rating™. For more information on F Scale™ click here.
OXIDATION RATE
The resistance of a barbell to oxidation depends on the type of steel and the coating. Barbells at the lower end of the spectrum will require more care and maintenance to preserve their appearance than barbells at the upper end of the spectrum.
